Thread: Looking for a 50 size leccy, help me decide

few pics may help...

WP_001009.jpgWP_001008.jpgWP_001005.jpgWP_001000.jpgWP_001010.jpg

Originally Posted by Jamin_00

Have to say Dave my build with the Fusion with very straight forward and simple with no issues at all.

Electronics wise I had no issue using a mini vbar with 2 sats in the little hole and a Kontroniks sitting on top

Haven't got an ESC with a built in BEC so having to find somewhere to park a life or a bec isn't easy, I would say I was a very thorough and neat (Jack) builder and I hate things going together which are in my opinion wrong. There is nothing you can do about the mesh between the front umbrella gear and intermediate, on mine it's lopsided and I have too much mesh one side. I'll be buggered if I'm buying anything else to make it work as it should out of the box. Electronics I can just about get a life pack of a certain size on the front. On the pro however there is plenty of room and Align have made provision for this. Just my opinion of course.

Hmmm still cant decide for definate.. I might just bite the bullet and order a Fusion to be done with it... but not with a Pink cano like you Nick

If space is that tight Dave, I might have to plump out for the KT Esc and go for the 7200bx

Ben - does the fusion fit in the align 600 bag?

It's defo the way to go Eddie on the Fusion. I'm going to make an A123 receiver that fits the bill, just doesn't get me in the air Saturday unfortuantely. The AR7200 fits lovely in the gyro slot up front. If you site it just right you can still get to the pots with a longer screwdriver

Cheers Dave, I think it'll be OK as I have a spare Bx tool which I gently melted and bent the neck for the 500 pro as Ive got the bx between the frames... should be able to use it in the same way on the Fusion

Has anyone had any experience with the Outrage motor 4125-560kv Outrage 4125-560kV 12S Brushless motor ERG-4125-560. It comes out a bargain if brought with the kit, as its only £70 extra.

Its a fit without the canopy Eddie

The outrage motor sits somewhere between the scorpion 4025 and 4035 motors, lots of people over on the freak are using them and give good reviews.
Mine fusion's got 48 flights on it now and it is a dream to fly. I'm really pleased I went for it instead of the logo or furion 6.

regards
Joe

I agree with the above comment I'm so glad I went with the fusion aswell. I have the beast X mounted on the side frame of the fusion and it works brilliantly

Originally Posted by 3DBish

I agree with the above comment I'm so glad I went with the fusion aswell. I have the beast X mounted on the side frame of the fusion and it works brilliantly

Post a pic of the Beast on the sideframe Jack, I've shoehorned it onto the gyro plate but it's a right royal pita in setup. I might move it once I've seen how yours is done.

I am a relative newbie, and I managed to get my fusion on last Saturday at 1 pm and maidened it on Sunday (last week) - so the build is relatively easy. I love the way it flies, even though I managed to blow-up my Align esc today. The fuselage is longer than the Align, which in my opinion makes it fly 'bigger' - I am currently flying it on 6s, but after my esc fire earlier am strongly considering 12s.

You decided yet Eddie?

Seems a popular debate this, the Fusion V's 600efl with varying opinions

Nope .. Whilst im p*ssing around deciding which to go for, I've brought the FBL controller, Edge blades and Opti 3500 packs for it Not in any rush mate.. got too much going on with this house I brought thats being totally refurbed.. The only reason why im looking at a new heli is because I had an accident and was bored out of my head doing nothing due to injuries.

There are a good few threads on HF but I don't think they will help you in making your mind up tbh as whilst one will favour the 600 the next will be for the Fusion lol.