Thread: Logo 400 airframe

Hi,

I'm selling my logo 400 as it's too expensive to repair each time :/

I had a few spares, so the only parts needed to complete it are boom supports and a horizontal tail fin. The skids are repaired with a bit of CA (just in one place).

It has quite a few upgrades including the £50 Quick UK Swash, Mikado Hardened main shaft (£25) (turned out not to be bent!!), and a fusuno vertial fin and canopy.

This will need assembly. Please see the pics below.

IMG_1161.jpgIMG_1162.jpgIMG_1163.JPGIMG_1165.JPGIMG_1166.jpgIMG_1170.jpg

I am pricing this at £200 with the motor (delivered), or £170 without. Payment by PPG or fees covered please

thanks

Stanley

Is this a full heli or just an airframe ?

It's just the airframe (and motor if you want it). I have also got an ESC and cyclic servos for it in my other thread - http://www.rcheliaddict.co.uk/sale/72927-ds510-metal-gear-servos-ds650-ice-100-esc-scorpion-motor-wide-range-lipos-etc.html

I just noticed that the tail shaft is also bent, so it's going to need replacing. The price is reduced to £165/195 to compensate for this.

Any swaps will also be considered

Sorry to hear that your not getting on with your logo 400 Stanley. I had the same issue as you, first hover then crash. Ended up taking it to Noel cross to fix issues with vibs. Pm me if you want details of how we sorted out the issues with my heli

I think that the vibes were either down to gear mesh setup or the belt tension? I would have given it another shot, but I gave it two tries and I really didn't know that the spares were so much. I've also already sold quite a bit of the electronics!

Thanks though

OK new price - £240 with the scorpion motor, two ds510s with metal gear sets and a ds510 without a gear set.

150 for the airframe only

The Scorpion motor is now sold pending payment.

New price for the logo is £180 with the servos, or £150 for the airframe only!

Swapped